This product is the Beam Assembly portion of the Foxx Mount Desk Mounts.
Combine this with a Mounting Plate for a complete Desk Mount.
Note, this is just the beam assembly, not a full desk mount, so you cannot use this on it's own to secure a stick or throttle. A Mounting Plate is required as an additional purchase to secure a stick or throttle.
A Desk Mount Beam Assembly includes the following:
- Vertical Assembly [Vertical Beam, Top Plate, Toggle Clamp Assembly]
- Horizontal Assembly [Horizontal beam, 1x2 Endcap]
- Anchor Fastener (Qty 2)
- 1x2 Endcap
- 5/32 Allen Wrench (One included per order)
The extrusion used in the Beam Assembly is imperial 10 Series 1020 profile, which is 1" thick x 2" wide, with a slot spacing of 1". For more details on what this means, see my Extrusion Info page.
Standard Length assemblies are sized to handle the majority of desks and devices. The vertical beam is 12" long and the horizontal beam is 7" long. This allows the base of the device to be positioned from 0" to 11" below the desk top surface, and allows for an adjustment of 0" to 6" away from the desk. Standard desk mounts can handle up to a 10cm (4") stick extension in most cases.
Extended Length assemblies are sized to handle sticks with long extensions on them. The vertical beam is 18" long and the horizontal beam is 10" long. This allows the base of the device to be positioned from 0" to 17" below the desk top surface, and allows for an adjustment of 0" to 9" away from the desk. Extended Desk Mounts can handle sticks with up to 20cm extensions. There really isn't any reason to get an extended length Desk Mount Beam Assembly for a throttle, as throttles don't need the extra height or adjustment, so save some money and just get a standard length instead. If you're not sure if your stick has an extension or not, just get the Standard Length.
Two Colors are available, Silver and Black. The color is created by anodizing the aluminum, and applies to the Top Plate, Vertical Beam, and Horizontal Beam only.