Use these Variable Angle Brackets to rotate your devices left or right to account for corner, or curved desks. The angle can be adjusted infinitely from 0 to 90 degrees. These are added in between the Vertical Beam, and Horizontal Beam on your desk mount.
Note, these are designed to be used with Imperial 1020 extrusion (1" x 2") and are not compatible with larger extrusion sizes such as the 40 series extrusion used on other mounts on the market.
Variable Brackets come mostly assembled, you will just need to loosen the two slide nuts on them, slide them to the desired height on the vertical beam, and tighten to secure. From there you drop the two included screws into the hole and curved slot, twist on the included slide nuts, and slide on your horizontal beam. Set the beam at the desired angle, and tighten down the screws, and you're good to go!
If you need to change whether this is for a Left hand mount or Right Hand mount, just remove the plate from the extrusion stub, flip it over, and mount it again.
Color: Specify Black or Silver to match your Desk Mount set
What's Included in the box:
- Variable Angle Bracket
- 1/4-20 x .500 Button Head Cap Screw (Qty 2)
- 1/4-20 Economy Slide Nut (Qty 2)
Note: The last two photos show an example of the Variable Angle Bracket installed with a Desk Mount Beam Assembly. A Desk Mount Beam assembly is NOT included with this product.