Due to the size, weight, and mounting geometry of the WINWING Taurus Throttle, a new variant of the mount was required.
One key factor of this mount is that it requires the use of a strong solid wood desk. A dense particleboard top is likely fine, but any hollow construction desks, or glass desks are not recommended. The desk must be free of any cross-bars or obstructions for at least 2" on the underside of the desk.
This version of the mount utilizes a wider top plate, and a custom designed solid clamp foot. Due to these changes, the adjustments to the compression of the toggle clamp require the entire toggle clamp to be repositioned along the beam. This will take a little trial and error, but once in place it should not need to be adjusted again. It is suggested to set up this compression to the desired level BEFORE securing the Taurus throttle to the mount.
The horizontal portion of the mount uses a unique design that is meant to take the place of the 2 screws on the Taurus Throttle that normally hold the forward bracket. These two holes are threaded into the main structure of the throttle, and result in a very robust connection.
The mount puts the throttle closer to the desk than the default mount from WINWING, and allows for a height adjustment of 0-10in below the desk.
For starts the mount will only be available in silver. A Black version will be made available in the future.